The damage, wear, deformation, and loss of dynamic balance of the drive shaft components will cause abnormal noise and vibration when the car is driving, and will cause damage to rel...

Semi-floating half shaft means that the half shaft not only bears torque, but also bears bending moment. The inner side of such a half shaft is connected with the differential half s...

Full-floating half shaft means that the half shaft only bears torque, not any bending moment. The inner side of such a half shaft is connected with the differential side gear through...

The half shaft is a solid shaft that transmits torque between the differential and the drive wheels. The inner end is generally connected to the half shaft gear through a spline, and...

Constant velocity drive shaft Constant velocity universal joint is an organization that connects two non-coincident shafts and enables the two shafts to transmit motion at the same angular velocity.

Drive shafts can be classified into different categories according to their important components-universal joints. According to whether the universal joint has obvious elasticity in ...

The drive shaft is composed of a shaft tube, a telescopic sleeve and a universal joint. The telescopic sleeve can automatically adjust the distance between the transmission and the d...

In order to ensure the normal operation of the drive shaft and prolong its service life, the following issues should be paid attention to during use!